CEN.GRAND9i-92SA Mk3 DAC/headphone Amp/Pre Amp
9i-92SA
Due to success of 9i-92SA " golden thrush" second and first generation the third generation was born. but it's DAC chip was changed from AK4497 to ESS9038Pro . . .As a general rule the performance of ESS DAC chip is highly analytical and dynamic but it's sound is a little hard, so there are many special adjustment have applied to the third Generation and got good effort . . .It already has many users and has very good comments. It has strong competitiveness
9i-92SA III "Golden Thrush" DAC / headphone amplifier / preamplifier is a desktop hifi product for headphone user. A variety of advanced technologies and solutions such as USB isolation technology were integrated , such as ESS 9039Pro DAC chip work in eight channel parallel connection, etc.. The audio quality especially headphone amplifier performance is excellent. It will get good effect in driving the mainstream headphones such as HD800S and T1-II.
"Golden Thrush" has many functions and performs well on the adaptability of the headphones. There are not only four types of output mode for adapting many kinds of headphones but also different output circuits for high and low impedance headphones. As a headphone hifi product, "Golden Thrush" is good at both performance and function.
The 9i-92SA "Golden Thrush" consists of the following parts:
1: USB interface. XMOS second generation XU208 + FPGA digital processing module , isolation technology is used to isolate noise from the computer. Support for NativeDSD512 and PCM384 input.
2: AK4118+ dual ESS 9038Pro DAC chip. The SPDIF receiver has three interfaces: coaxial, optical, and AES, support PCM 24bit/192KHz and DOP (DSD64) inputs.
3: Headphone amplifier. It has 6.35 unbalanced interface and 4-pin XLR balanced interface. It has four output mode: Normal, BTL, Active Ground and Parallel.
4: Pre-Amp consisting of discrete components. "Golden Thrush" can be used as a pre-amp, the input interface is RCA and XLR, with infrared remote control.
5: Power supply and display system.
Two ESS 9038Pro DAC chip are used and one for each channel. There are 8 internal DAC in each 9038Pro chip. Most of DAC which used 9038Pro chip only use one or two of them. The others are idle. The mode of multiple DAC channel parallel has many advantages but it is not easy to get good sound and heating is serious. The 9i-92SA III is different. With careful design and adjustment, the structure of 8 internal DAC parallel is one of important reason of good sound.
There are 4 modes of connecting to headphone . Each mode has its own characteristics, and the difference is very obvious. This funtion is very useful for user , because he can chooses the most suitable mode for his headphone. Under normal conditions high-impedance and high-quality headphones are suitable for Blanced(BTL) mode, in this mode the headphones can fully be driven by Amp. When your headphones are easier to be driven , you can choose parallel or Active G mode to drive them, as well as Normal mode. Here, I would like to introduce what is the "virtual ground(Active G)" mode.
Usually the positive terminal of the headphone cable should be connected to the positive output, and the negative terminal should be connected to the GND. If we make the input terminal of amplifier to GND, its output will get 0 level, which is the same level as GND. At this time if the negative terminal of the headphone is connected to this 0 level , it is equal to connecte GND. But this is not the real GND, only simulated GND, that is to say "virtual GND"(Active Gnd). This kind of connection can get a more unique sound, the listening experience is warmer and softer, more suitable for listening to human voice or string. In short, the "virtual GND"(Active G) mode provides users with an effective tuning method that increases adaptability and entertainment.
The second generation of XMOS is the latest XMOS solution which is faster than last. Isolation technology enables blocking between the computer and 9i-92SA. The ground wire is not connected so noise was almost completely isolating from the computer. This feature is very effective because there are a large number of switching power supplies inside the computer that generate a lot of noise which can interfere with the analog circuit , audio performance will be degrade. Isolating these noises can significantly improve the purity of the sound.
The code inside the FPGA has several functions: data isolation management, clock distribution, and DOP decode.
The LPF is a balanced structure and a high performance OP Amp OPA2604 was used . The analog output section is composed of a discrete device architecture which has been carefully tuned to correct the sound. The volume control chip is PGA2311 which controlled by MCU and the volume range is -70db~0db. Its common volume has been optimized, volume adjustment and listening habits are more coordinated and there are reliable protection measures.
The headphone amplifier uses a current feedback circuit. The technology of headphone amplifier is actually simple and the key is adjustment. Drawing on extensive experience in hifi systems, we have achieved very good results in designing of the "Golden Thrush" headphone amplifier. It not only has strong driving ability but also sound balance, clear and delicate, strong sense of space. You can listen for a long time as well as forget the existence of headphones just like listening to the big HiFi system.
The display use a customised VFD。 The information displayed complete, the color matching is stable and beautiful.
Use of 9i-92SA
9i-92SA is a DAC which with coaxial, optical, AES and other digital input interfaces. It can be used to upgrade CD player, or as an external DAC for digital players in your audio system. It has a volume adjustment function.
It is a fully balanced pre-amp with RCA/XLR input and output interface. Active speakers can be connected to it for building desktop hifi systems. You can also use it as a pre amp to connect to your power amplifier to build a large hifi system.
It is a pure headphone amplifier . It drives both high and low-impedance headphones with good musical expression.
It is an advanced USB DAC with the second generation of XMOS. The driver is a customized version and is a good choice for pc hifi players.
The most common use of the 9i-92SA : Connect this unit to your computer via a USB cable, the music data is transferred to the unit. USB supports DSD512/PCM384. The computer player is very compatible and powerful so it can play music in any format.
The 9i-92SA's headphone amplifier has good quality and can drive mainstream high-end headphones. Its two output circuits enables it to adapt to both high and low-impedance headphones. Four output modes make the 9i-92SA has good adaptability to various headphones. Whether 600 ohm high-impedance headphone or 30-ohm it can be well adapted.
Tech Spec
Maximum audio support specifications: Spdif input ----- PCM192
USB input ----- DSD512 PCM384
Dynamic range: 115dB
Signal to noise ratio: 115dB (A weighting)
Frequency response: ±0.4 dB (20-20KHz A weighting)
THD+N: -102dB (fs=96KHz /10KHz A weighting)
Pre-level gain: 4db (volume is 0db)
Output power: 2.1W (33 ohms distortion 0.9%) 0.5W (600 ohms distortion 0.027%)
Dimensions: 320mm * 100mm * 310mm (WHD)
Power supply: AC 220V-230V 50-60HZ (Fuse specification: 6.3A)
Net Weight: 6.2kg
Gross Weight: 7.3kg
RETURN & REFUND POLICY
The Music Room enjoys a 40-year tradition of customer care and at time of writing, full 5-star Google reviews. In addition UK customers enjoy the legal rights of mail order and distant selling.
We have exported happily for many years and most probably have happy customers in your country who will confirm our reliability and refund in the event of mishaps.
Refunds can only be made by the same payment form and to the same account to avoid possible fraud or money laundering.
The Music Room price matching...
The Music Room price matching...
We are an official Zingali dealer and offer the best UK prices. If you have seen this product cheaper elsewhere, Let us know; we will match or beat any price.
SHIPPING INFO
UK Shipping:
We use DHL as a result of their careful and reliable service. Their customer communications and tracking are reliable.
Europe, EC, and abroad:
For every despatch we use a professional broker to organize the fastest and highest quality shippers, and we normally use DHL or Fed Ex depending on territory. Our broker monitors the documentation and Customs Clearance carried out by these two reliable carriers.
Above 30kg:
For UK and overseas we use pallet shipping which is a professional service and avoids risks of mishandling and loss. It is not expensive under our contractors and worth a quote.